Wearwell 558 ERGODECK COMFORT OPEN - Installation Guide - Manual (Page 3)

Ergonomic Flooring Installation Guide:
REJUVENATOR ®
STEP 1.
To cover your work area, always align the mats so that the connectors are
positioned in the same direction, as illustrated:
STEP 2.
Lay the first mat over the second, placing the female side over the male interlocks.
Rejuvenator for longer runners.
Rejuvenator for custom areas.
+
STEP 3.
Attach safety ramps to the mats. After the ramps are attached, the corner
section must be cut off the rest of the ramps and installed along that edge.
Simply cut this corner off with a utility knife or a large shears. Use the indented
line on the surface of the ramp as a guide.
When attaching the safety ramps, it is best to start at one end of the mat
installation and work your way around. The end of the first ramp will create a
corner.
End Mat w/ Male Connectors
Center Mat
End Mat w/ Female Connectors
The corner created by
attaching the ramp
to the mat.
PERMANENT
INSTALLATION:
Place a drop of “SuperGlue”
on the male connectors
and press down lightly for
5 seconds. Repeat this
process completing one
row at a time.
Male Connectors
Hidden Female Connectors
1
2
3
3
Protected Design, Rejuvenator ® Patent: 001947466.