ACP RMS10D Spec Sheet - Manual (Page 2)

20”
(508)
12-1/4”
(311)
14-1/4”
(362)
9”
(223)
16-1/2”
(419)
4”
(102)
29”
(737)
1-5/8”
(41)
1”
(25)
ACP commitment to quality may mean a change in specification without notice. Product of the U.S.A. © 2012 ACP Inc.™ Printed in the U.S.A.
AIA File #:
Specification #:
225 49th Ave. Dr. SW Cedar Rapids, IA 52404 U.S.A. | 800-233-2366 | 319-368-8120 | Fax: 319-368-8198 | www.acpsolutions.com
Amana Commercial Microwave Model RMS10D | Low Volume
Specifications
Model
RMS10D UPC Code 728028020786
Configuration Countertop
Control System Dial
Max. Cooking Time 6:00
Power Levels 1
Time Entry Option Yes
Microwave Distribution Rotating stirrer, bottom
Magnetron 1
Stage Cooking 1 stage
Interior Light Yes
Door Handle Grab & Go
Signal End of cycle
Exterior Dimensions H 12 1 ⁄
4
” (311) W 20” (508) D* 16 1 ⁄
2
” (419)
Cavity Dimensions H 7 3 ⁄
4
” (197) W 13” (330) D 13” (330)
Door Depth 29” (737), 90 o + door open
Usable Cavity Space 0.8 cubic ft. (23 liter)
Exterior Finish Stainless steel wrap
Interior Finish Painted
Power Consumption 1500 W, 13 A
Power Output** 1000 W** Microwave
Power Source 120V, 60 Hz, 15 A single phase
Plug Configuration / Cord NEMA 5-15 5 ft. (1.5m)
Frequency 2450 MHz
Product Weight 32 lbs. (14.5 kg.)
Ship weight (approx.) 39 lbs. (17.7 kg.)
UPS Shippable Yes
Shipping Carton Size H 15” (381) W 23” (584) D 18” (457)
Specifications
Commercial microwave shall have a user-friendly 6 minute
dial timer with illuminated digits and end of cycle audible
signal. Timer shall automatically reset to zero if the door is
opened during heating. Oven shall have one power level - full
power. Microwave output shall be 1000 watts distributed by
one magnetron with a bottom feed rotating stirrer to provide
superior even heating throughout the cavity. Durable door
shall have a tempered glass window and a grab and go
handle with a 90
o + opening for easy access. An interior light
shall facilitate monitoring without opening the door. The
0.8 cubic ft. (23 liter) cavity shall accommodate a 12” (305
mm) platter. Oven shall have a stainless steel exterior wrap
and white powder coat painted interior. Microwave oven
shall comply with standards set by the U.S Department of
Health and Human Services, UL923 for safety and NSF4 for
sanitation.
Warranty
Warranty Certificate for this product can be found on the ACP,
Inc. website at:
www.acpsolutions.com/warranty
Service
All products are backed by the ACP, Inc. 24/7 ComServ
Support Center.
Measurements in ( ) are millimeters
* Includes handle
**IEC 60705 Tested
Installation clearance: 3” all sides Drawings available from KCL CADlog - [email protected]