ACP MDC212 Spec Sheet - Manual (Page 2)

ACP commitment to quality may mean a change in specification without notice. Product of the U.S.A. © 2013 ACP Inc.™ Printed in the U.S.A.
AIA File #:
Specification #:
225 49th Ave. Dr. SW Cedar Rapids, IA 52404 U.S.A. | 800-233-2366 | 319-368-8120 | Fax: 319-368-8198 | www.acpsolutions.com
Menumaster Commercial Microwave Model MDC212 | Heavy Volume
Measurements in ( ) are millimeters
* IEC 60705 Tested
** Includes handle
Specifications
Commercial microwave 10 touch pad control panel shall be
programmable with the ability to program up to 100 menu
items and shall have automatic cooking capability for up to
eight portions. Cooking timer shall be 60 minute, countdown
style with a time entry option and an adjustable end of cycle
audible signal. LED display shall be a backlit and include a
temperature reading. There shall be 11 power levels, 4
cooking stages and defrost mode at 20% power or power
level 2. Microwave output shall be 2100 watts distributed by
two magnetrons each with a rotating antenna to provide
superior even heating throughout the cavity. An automatic
voltage sensor shall accommodate both 208 and 240 volts.
Heavy duty door shall have a tempered glass window and a
grab and pull handle with a 90
o + opening for easy access.
An interior light shall facilitate monitoring without opening
the door. The large .6 cubic ft. (17 liter) cavity shall accom-
modate a standard 6” (152 mm) deep half-sized pan. Interior
ceramic shelf shall be sealed and recessed on oven bottom to
reduce plate-to-shelf edge impact. Oven shall have a stainless
steel interior and exterior and be stackable to save counter
and shelf space. Oven shall have a removable, cleanable
splatter shield. Air filter shall be easily accessible and
removable from the front of the oven and have a “clean filter”
reminder feature. Microwave oven shall comply with
standards set by the U.S Department of Health and Human
Services, ETL for safety and sanitation.
Warranty
Warranty Certificate for this product can be found on the ACP,
Inc. website at:
www.acpsolutions.com/warranty
Service
All products are backed by the ACP, Inc. 24/7 ComServ
Support Center.
Specifications
Model
MDC212 UPC Code 728028020656
Configuration Countertop
Control System Touch
Programmable Control Pads 10
Settings Programmable
100
Max. Cooking Time 60:00
Power Levels 11
Defrost
Yes, power level 2
Time Entry Option Yes
Microwave Distribution Double rotating antenna, top and bottom
Magnetrons 2
Display LED
Stackable Yes
Stage Cooking Yes, 4
Interior Light Yes
Door Opening Grab and pull handle
Signal Adjustable, end of cycle
Air Filter Yes, removable, with clean filter reminder
Automatic Voltage Sensor Yes
Multiple Portion Setting Yes, up to 2 portions
Exterior Dimensions H 13 1/2” (343) W 16 1/2” (419) D** 21 5/8” (549)
Cavity Dimensions H 6 3/4” (171) W 13” (330) D 12” (305)
Door Depth 37” (940mm), 90 o + door open
Usable Cavity Space .6 cubic ft. (17 liter)
Exterior Finish Stainless steel
Interior Finish Stainless steel with sealed-in ceramic shelf
Power Consumption 3200 W, 15.3 A
Power Output* 2100 W* Microwave
Power Source 208 - 240V, 60 Hz, 20 A single phase
Plug Configuration / Cord NEMA 6-20 5’ 6” (1.7m)
Frequency 2450 MHz
Product Weight 67 lbs. (30 kg.)
Ship weight (approx.) 74 lbs. (34 kg.)
Shipping Carton Size L 24 5/8” (625) W 21 7/8” (556) D 18 5/8” (473)
UPS Shippable Yes
16-1/2”
(419)
13-1/2”
(343)
15-1/2”
(394)
17-1/4”
(438)
21-5/8”
(549)
35-1/2”
(901)
3-1/2”
(89)
1”
(25)
1-1/2”
(38)