Yamaha DV-C6280 - Manual (Page 34)

30
9. Other Settings
DESCRIPTION OF EACH ITEM
2 Audio during Search
To select whether to hear audio
during search forward at the
initial search speed when playing
DVD or VCD (CD can be heard
at any speed).*
3 TV Mode (4:3)
To select the picture style when
playing a widescreen video disc
on a standard 4:3 width-to-height
ratio video monitor.
1 Still Mode
To adjust the quality of still
picture.
1 Automatic
2 Field
If jittering occurs when ‘1 Automatic’ is
selected, switch to this position.
3 Frame
If detail such as small patterns or letters of still
picture is not clear when ‘1 Automatic’ is
selected, switch to this position.
1 On
2 Off
1 Pan & Scan
The video appears in pan and scan style, with
either one or both ends cut off.
2 Letterbox
The video appears in letterbox style, with
black bands on top and bottom of the monitor.
4 D.(Dynamic) Range Compres-
sion
To compress the dynamic range
(the difference between the
maximum level and the minimum
level of sounds) as necessary.
This item is only effective for
Dolby Digital DVD.
1 Off
Played back with disc’s original dynamic
range.
2 On
The range is compressed to make it easier to
hear dialog, etc. even at low volume level.
Select this position in occasions such as
viewing late at night.
5 Still Picture Display [DVD]
To show I, P or B** during still
picture mode.
1 Off
2 On
Other Settings
1 Still Mode
2 Audio during Search
3 TV Mode (4:3)
4 D. Range Compression Automatic
5 Still Picture Display
On
Pan&Scan
Off
Off
6 Black Level Control Lighter
Press RETURN to exit
Other Settings
1 Still Mode
2 Audio during Search
3 TV Mode (4:3)
4 D. Range Compression Automatic
5 Still Picture Display
On
Pan&Scan
Off
Off
6 AV Output Video
7 NTSC Disc Output PAL60
Press RETURN to exit
Other Settings
1 Still Mode
2 Audio during Search
3 TV Mode (4:3)
4 D. Range Compression Automatic
5 Still Picture Display
On
Pan&Scan
Off
Off
6 NTSC Disc Output NTSC
Press RETURN to exit
Still (P)
Example: ‘P’ Picture
* DTS audio is not heard during search regardless of the setting.
** I/P/B: When ‘I’ appears, it indicates that the frame is the original one and has
greater amount of information than that of ‘P’ or ‘B’. ‘P’ is made from ‘I’,
and ‘B’ is to fill in the space between ‘I’ and ‘P’. It is recommended to use ‘I’
picture for adjusting video image.
U.S.A. and Canada models
U.K. and Europe models
General and Australia models
Black Level Control
U.S.A. and Canada models
To adjust luminosity of black color
according to the type of video
connection you have made.
1 Lighter
Select when you made video connection
through the composite or S-video terminals.
2 Darker
Select when you made video connection
through the component terminals.
AV output
Europe and U.K. models
To select the video signal type
(composite or S-video) to be output
from the SCART terminal.
1 Video
Composite signal is output.
2 S Video
S-video signal is output.
NTSC Disc Output
Europe, U.K., General and
Australia models
To select video signal format (PAL
60 or NTSC) to be output when
playing NTSC disc.
1 PAL 60
Select when the connected video monitor can
accept PAL 525/60 system.
2 NTSC
Select when a Multi-system video monitor is
connected.
106-C996(E)25-30 7/31/0, 4:17 PM 30