iGo ac051050001 USB Charger with 2 AA Rechargeable Alkaline Batteries - Manual (Page 2)

Quick Connect Guide
1. Insert one or two NiMH rechargeable AA
or AAA batteries as indicated by the
battery diagrams on the unit
2. Plug the unit onto any iGo charger and
make sure that the arrow on the charger's
connector faces up
3. Once connected, plug the iGo charger
into any power outlet
4. The blue light will begin to flash to indicate
the batteries are charging
5. Once the batteries are fully charged the blue
light will stop flashing and glow solid
6. Unplug the battery recharger and remove
the batteries
Carefully read this Quick Connect Guide before
using this iGo accessory for the first time. Incorrect
usage can result in your batteries not charging
properly. An iGo charger is required to use this
accessory (sold separately).
NOTE: If a faulty or damaged battery is inserted
into the unit, the blue light will not illuminate. In
order to verify if just one or both of the batteries is
faulty, insert each battery one at a time. If the blue
light begins to flash (indicating charge), that battery
is in good condition.
iGo ® battery recharger
Use with any
iGo ® power charger
(sold separately)
connector
• Charge only NiMH (Nickel Metal Hydride)
rechargeable batteries that are in good condition.
• Charging any other type of battery may cause
damage to the batteries and/or the unit.
• Make sure that the batteries are inserted
correctly (see the diagram).
• Do not mix battery types (for example: different
capacities or brands).
• Do not use the battery recharger in wet or moist
conditions. Protect the battery recharger against
liquid spills.
• Use only with compatible iGo chargers and
adapters.
• Be aware that rechargeable batteries degrade
over time and should be replaced periodically to
ensure your gadget performs as expected.
Before using iGo battery recharger, please read this important safety information:
blue light
batteryrecharger_UG_2:Layout 1 5/29/2008 9:59 AM Page 2