Garmin GPS 150 - Manual (Page 71)

The GPS 150 features two RS-232 data ports which can be configured to accept
input from altitude serializers, fuel flow systems, fuel/air data computers or output
aviation data to moving maps, fuel flow sensors, or the GARMIN PC 150 software kit.
Channel 1 input selections correspond to the following:
• Icarus Model 3000 Mode C serializer (icarus-alt)
• Shadin serial altitude (shadin-alt)
8800T Series Encoder System
9000T Serializer System
9200T Series Serializer System
• Shadin fuel information (shadin-fuel)
Shadin 91204XT Digital Fuel Management System
Shadin 91053XT Digital Fuel Management System
• Fuel information (arnav/ei-fuel)
Arnav Model FC-10 Fuel Computer
Arnav Model FT-10 Fuel Totalizer
Electronics International Model FP-5L Fuel Flow Computer
• Shadin Model 962801 Fuel/Air Data Computer (shadin-fac)
Channel 1 output selection corresponds to the following:
• Serial position, velocity, and navigation data (aviation)
Argus Model 3000 Moving Map
Argus Model 5000 Moving Map
Argus Model 7000 Moving Map
Stormscope, Series II with Navaid, Moving Map
Shadin 91204X[T] Digital Fuel Management System
Shadin 91053X[T] Digital Fuel Management System
Shadin Model 962801 Fuel/Air Data Computer
Electronics International Model FP-5L Fuel Flow Computer
61
REFERENCE
Input & Output Interfaces
Section
5
150man rev E 7/24/98 3:11 PM Page 61