Garmin GDL 30A - Manual (Page 26)

GDL 30A Owner’s Manual
Main Menu
XM Tab
To display the XM tab, press and hold the ADJ/MeNU key to display the Menu Menu. Using the RoCKeR, scroll through the tabs and
highlight the XM tab. The XM tab contains two sub tabs, Audio and Information. The Audio sub tab is used to tune and customize the XM
Radio feature. The Information sub tab contains the Radio ID numbers and information about the XM service being received.
Audio
The Audio sub tab provides access to the XM Radio feature. From this tab, stations can be scanned, selected, and added to a Favorites list.
Also, the Audio Output can be turned on and off. If the GDL 30A is properly connected, the Audio Output should be set to On. If CHECK
ANTENNA appears in the radio tuning field, double-check to ensure that the GA 32 antenna is properly installed and that the audio cable
is securely connected to your GDL 30A and to your stereo receiver. For more information on using the XM Radio feature, refer to the
chartplotter Owner’s Manual.
Audio Tab
If your GDL 30A is properly connected, you
will see “On” in the Audio Output box and “XM
Preview” in the radio tuning field.