Step 1: install the nüvi battery, Step 2: charge your nüvi, Step 3: mount your nüvi – Garmin nuvi 500 User Manual
Page 4
Step 1: Install the nüvi Battery
1. Locate the lithium-ion battery that came
in the product box.
2. Slide the release key up to open the
battery cover on the back of the nüvi.
3. Locate the metal contacts on the end of
the lithium-ion battery.
4. Insert the battery so that the metal
contacts on the battery match up with
the metal contacts inside the battery
compartment.
5. Press the battery into place.
6. Slide the battery cover back on until it
clicks into place.
Step 2: Charge Your nüvi
Use the vehicle power cable to charge your
nüvi. To purchase an optional USB cable or
Step 3: Mount Your nüvi
1. Pull back the weather cap from the mini-
USB connector located on the back of
your nüvi.
2. Plug the vehicle power cable into the
mini-USB connector.
3. Snap the cradle onto the suction cup
arm.
Lever
Cradle
Suction cup
arm
4. Remove the clear plastic from the suction
cup. Clean and dry your windshield and
the suction cup with a lint-free cloth.