Acura Embedded AcuTouch 10″ - Manual (Page 4)

AcuTouch™ Manual User’s Manual
Installation
1. Turn power off for both Computer and Display before
making any connection.
2. Connect the power cable (12v AC/DC adapter or 8v –
30v DC).
3. The LCD monitor comes with a 15-pin video cable; you
may use this cable for both IBM PC’s & compatibles and
Macintosh.
4. Tighten the screws of the Display cable until the
connectors are fastened securely.
5. Switch on power to the monitor, then to the computer
system. Red LED should be on when only the monitor is
powered on and green LED should be on when both
monitor and computer are powered on.
The following picture provides the connection outline
Page 3
The Display Timing
Mode Resolution
VGA 640x480 @60Hz
SVGA 800x600 @56Hz
800x600 @60Hz
XGA 1024x768 @60Hz
SXGA 1280x1024 @60Hz
USB or Serial
Touch USB
12V DC input VGA
8-30V
DC
input
Page 4