Activeforever Global Lift Commercial Series Portable Lift 450 - Manual (Page 6)

STEP 3: Assemble the template with the 3 threaded anchor rods.
• Place a ¾” nut on top of each threaded rod, then place the template on top and bolt
Down with the ¾” bolts provided (refer to picture A).
• Place the assembly in your drilled holes as shown in picture B. make sure that the top
Of the anchor rods are flush and level with the existing concrete, also with connecting the
Bonding lugs to the bonding grid according to the local codes and ordinances
Picture A Picture B
Note: Anchor must be
Electrically bonded. Please
See the NEC requirements.