Acnodes IPS - Manual (Page 63)

Single port KVM over IP switch
60
6.6.3 Unit Reset
Figure 6-34. Unit Reset
This section allows you to reset specific parts of the device. This
involves the both keyboard and mouse, the video engine and the IP-KVM
itself. Resetting the card itself is mainly needed to activate a newly
updated firmware. It will close all current connections to the
administration console and to the Remote Console.
The whole process will take about half a minute. Resetting subdevices
(e.g. video engine) will take some seconds only and does not result in
closing connections. To reset a certain IP-KVM functionality click on
the button Reset as displayed in Figure 6-34 .
Note: Only the super user is allowed to reset the IP-KVM.