Acme ME-100 - Manual (Page 7)

7
GB
1. Select the desired attachments, which depend on the mixing task to be performed: beaters for
whisking, mixing and beating, dough hooks for kneading.
2. Insert the beaters/dough hooks:
a) Beaters can be inserted in either socket, as the beaters are identical.
b) For dough hooks, the one with washer can only be inserted into the big socket and the other
one can only be inserted into the small socket. The two dough hooks can not be inserted
reversely as they do not fit.
HOW TO USE
The mixer is used for mixing the food. Please, use it as follows:
1. Ensure that either beaters or dough hooks are fully inserted into the correct sockets or your
mixing results may be affected.
2. Set the speed selector in the „0“ position and plug the cord into power outlet.
3. Turn the speed selector to your desired speed and begin mixing. The mixing speed will be
increased when turbo button is depressed. Always start mixing at slow speeds and increase
the speed gradually to prevent ingredients splashing out of the mixing bowl.
4. The max operation time per time shall not exceed 5 minutes. When mixing is complete, turn
the speed selector to „0“ position and unplug the cord from power outlet.
5. Scrape the excess food particles from the beaters or dough hooks with rubber or wooden
spatula.
6. To remove the beaters/dough hooks, place fingers loosely around the spindles and press
down the Eject button firmly.