Operations – Acme SS-110 User Manual
Page 6

6
Operations
• Rotate the “Volume” knob to the end to the “-” side before inserting the USB plug into the USB
port of the PC.
• Insert the USB plug into the USB port of the PC.
• Connect the Ø3.5 mm signal input cable to the audio frequency output jack of the PC or sound
appliance.
• Turn the power ON by rotating the “Volume” knob, which is on the side of the speaker, clockwise
and keep turning it in the same direction to increase volume.
• Adjust volume by using the “Volume” control knob (rotate to the “+” side to increase or rotate to
the “-” side, to decrease volume).
• On the side of the speaker is a Ø3.5 mm headphone stereo jack. Volume in the headphones
changes via the PC by software.
• When not in use, turn the “Volume” knob to the minimum level (completely to the “-” side). In this
way power will be switched off.
Waste Electrical and Electronic Equipment (WEEE) Symbol
The use of the WEEE symbol indicates that this product may not be treated as
household waste. By ensuring this product is disposed of correctly, you will help
protect the environment. For more detailed information about the recycling of this
product, please contact your local authority, your household waste disposal service
provider or the shop where you purchased the product.
GB