Connecting your multimedia speaker system – Acme NI-30 User Manual
Page 6
6
GB
Connecting your multimedia speaker
system
1. For best results you should place your subwoofer close to the ground, or preferably on the floor
as shown in the picture to the right.
2. Once your subwoofer is placed on the ground, you can proceed to connect your satellite
speakers to the subwoofer. To do so, insert the cable attached to the two satellite speakers into
the SPEAKER/OUTPUT port on your subwoofer.
3. Connect the wire coming from the CONTROL port on your subwoofer to your audio source. If
your audio source has RCA ports, you may need to use the included RCA adapter plug to connect
your audio source.
Connect to
Audio Source
1.
2.
3.