Yamaha PSR-410 - Manual (Page 49)

47
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | |
MIDI Transmission
The PSR-410 allows any of the 16 MIDI transmit channels to be assigned to the R ORCHESTRATION voices.
■ MIDI Transmit Channels
The R ORCHESTRATION voices can be set to transmit on any of the 16 MIDI channels as follows:
Z
Press the [TRANSMIT CH] button .........................................................................................................
Press the [TRANSMIT CH] button to set the R voice transmit channel.
The currently selected channel will appear on the MULTI DISPLAY.
NOTES
• After selecting the transmit channel function, as described above, the
default transmit channel can be recalled by simultaneously pressing
the [+] and [–] buttons. The default "R" transmit channel is "1". The "L"
voices are transmitted on channel 2.
X
Select the Desired Transmit Channel ...................................................................................................
Use the [+] and [–] buttons, the number buttons, or the [TRANSMIT
CH] button itself to select the desired transmit channel.
NOTES
• The currently selected transmit channel is retained in memory even
when the power switch is turned off, as long as batteries are installed
or an AC adaptor is connected.
• To record the Song Memory data to an external sequencer, start the
sequencer running in the record mode, press the [RESET] button, and
then press the [PLAY/STOP] button.
• To record the Auto Accompaniment data to an external sequencer,
start the sequencer running in the record mode, select the style you
want to record, then start Auto Accompaniment playback.
• Notes played on the keyboard are transmitted on channel 1
(selectable) or 2, Auto Accompaniment data is transmitted on chan-
nels 10 - 16, and Song Memory melody data is transmitted on channel
3. Normally the Auto Accompaniment Rhythm 1 and Rhythm 2 data
are both transmitted on channel 10. To transmit these tracks sepa-
rately, hold the C1 key while turning the power on. When this is done
the Rhythm 1 data will be transmitted on channel 9 while the Rhythm
2 data will be transmitted on channel 10.
0 2 1
RESET
– +
TRANSMIT
CH