FIAT 600 User Manual

Page 50

GETTING TO KNOW YOUR CAR

To bring the seat to its normal posi-

tion again:

– Tip the seat back fig. 71 back-

wards while holding the seat belts in
front of the seat back. Ensure it clicks
into place.

– Bring the cushion to a horizontal

position making sure the seat belts do
not remain underneath.

fig. 70

P4Q00159

The car can be fitted with separate

rear seats.

With separate seats the boot exten-

sion possibilities are various and can
be decided according to the number
of passengers and how much luggage
is to be transported:

– all extended, by tilting both sides -

left and right - of the rear seat as de-
scribed above;

– partial extension with the left side

of the rear seat tilted and a back seat
for one passenger;

Anchoring the load

There are two brackets with holes

A-fig. 72 in the boot to fasten ropes
for anchoring the load. These brack-
ets are located at the base of the rear
seat (one on each side).

Other luggage anchoring holes are

located on the rear crossmember and
are closed with rubber caps.

To use the holes, remove the caps.

fig. 71

P4Q00135

fig. 72

P4Q00170

001-069 Seicento GB 22-11-2007 10:49 Pagina 49