Hama RC200 - Manual (Page 7)

12 13
• Press ALARM (ON/OFF) key to turn off the alarm.
• Press button 1 – alarm stops and the backligh will turn on for 5 seconds with
deleted, the repeat alarm indicator (Zz) flashing. The alarm sounds again after
4 minutes.
• If the alarm is not turned off, it will stop automatically after 4 minutes
Foreign Time Display & setting
• Press and hold for 3 seconds, the icon will turn on.
• Press and hold MODE for 3 seconds in Foreign Time/Temperature display.
The Foreign time can be set as described above by pressing or .
• Press MODE key again to confirm the setting of foreign time.
• Press and hold for 3 seconds to choose between local and foreign time
display.
Setting the Dual Time
• The dual time can be set by pressing MODE for 3 seconds
in Dual Time Display. The hour will flash for input.
• Press MODE: the hour of dual time display digits are
blinking and can be se by pressing or .
• Press MODE again: the minute of dual time display
digits are blinking and can be set by pressing or .
• Press MODE again to confirm the setting.
Light ON/OFF
Press top button 1 (SNOOZE / LIGHT) key - light bulb
backlight will come on and turn off automatically
after 5 seconds.
Temperature Funktion
Press °C/°F to select the temperaure display between
Celsius or Fahrenheit.
Receiving the DCF Time CODE
The clock will automatically receive the DCF time code every hour. Besides, you
can force the clock to receive the signal by pressing „Wave“ for 3
seconds, It will take 3-5 minutes to receive the radio signal. It the time signal is
received, the icon will be on otherwise it will be off.
Replacing the battery:
Please use only the types of battery that are approved for this device and ensure
that the polarity is correct when inserting a new battery.
00092630man_de_en_fr_nl_it_pl_pt_ru.indd 12-13 06.11.12 13:15