Hama USB 3.0 SATA Hard Disk Adapter - Manual (Page 4)

3
g Operating Instruction
Contents
1. Package contents
2. Notes
3. Connection
4. Installing the driver
1. Package contents
• USB 3.0 hard drive adapter
• Power supply unit
• Installation
instructions
• Software CD
2. Notes
Never disconnect the hard drive adapter from the
computer while data is being transferred.
You may lose data if you do so.
Hama GmbH & Co. KG does not accept liability under any
circumstances for loss of data stored on storage media.
3. Connecting hard drives
The following section describes how various hard drives
and drives can be connected to the PC using the hard
drive adapter.
2.5 " and 3.5" SATA hard drives:
Connect the included power supply unit to the USB 3.0
adapter. Then you can connect the hard drive to the
adapter. Now connect the hard drive adapter to a USB
connection on your PC or notebook.
4. Installing the driver
Windows 2000/XP/Vista/7 provide built-in driver support
for this hard drive adapter. You do not need to install an
additional driver.
5. Safety instructions:
• Do not operate the device in damp or dusty
environments.
• Do not operate this device on radiators or near
sources of heat.
• This device is designed for indoor use only.
• This device is not designed for use outdoors.
• Protect the device from pressure and impact during
operation.
• Do not open the device during operation.