ASSISTANT AH-1961 - Manual

1 ENGLISH ENGLISH
2 3 4
Multifunctional clock
with weather forecast
Model AH-1961
operational Manual
features
• Weather forecast with weather icons.
• Beep alarm.
• Indoor humidity.
• Indoor temperature.
• Min / Max temperature memory.
• Min / Max humidity memory.
• Temperature format °C or °F selectable.
• 12/24 hour time format selectable.
• Ideal to household.
specifications
Clock: hour, minute;
12/24 hour time format.
Indoor temperature
range:
from 0 °C to 50 °C
(from -32 °F to 122°F).
Indoor temperature
resolution:
0.1 degree.
Indoor humidity
range:
from 5% to 99%.
Indoor humidity
resolution:
1%.
Power source: 1xAA, 1.5 VDC.
Battery life: 1 year approx.
preparing for using
Open the battery compartment. Install one
piece of AA battery and close the battery
compartment.
Modes
In this clock there are two modes of displaying
the data.
ENGLISH ENGLISH ENGLISH ENGLISH
5 6 7 4 RUSSIAN РУССКИЙ
symbols «AL» and « » will be shown on the
display. To shift between the setting positions
press the [Mode] button.
The setting sequence is:
hour→minute→alarm on/off (« »)→
exit.
To set the selected position press the [set]
button needed number of times.
note: • If no buttons are pressed for a few seconds the
clock returns back to the «MODe 1».
• When the alarm is turned on the symbol « » is
shown on the display under the «MODe 1».
MiniMuM/MaxiMuM indoor
teMperature and huMidity
MeMory
For reading the maximum data for indoor
temperature and humidity under «MODe 2»
press the [Min/Max] button once. The symbol
«MAX» will be shown on the display.
For reading the minimum data for indoor
temperature and humidity under «MODe 2»
press the [Min/Max] button twice. The symbol
«MIN» will be shown on the display.
«MODe 1» – The clock displays time and
weather.
«MODe 2» – The clock shows indoor
humidity, indoor temperature and weather.
To shift between modes press the [Mode]
button.
setting tiMe
Under «MODe 1» press and hold the
[Mode] button to enter the time setting mode.
To shift between the setting positions press the
[Mode] button.
The setting sequence is:
12/24 hour time format→hour→
minute→temperature format
(°C/°f)→exit.
To set the selected position press the [set]
button needed number of times.
note: If no buttons are pressed for a few seconds the
clock returns back to the «MODe 1».
setting alarM
Under «MODe 1» press and hold the [set]
button to enter the alarm setting mode. The
weather forecast
To show weather forecast the clock uses 4
weather icons.
• The icon «SUN» means the sunny weather.
• The icon «SUN+CLOUDS» means the partial
sunny or cloudy weather.
• The icon «CLOUDS+rAIN» means that the
atmospheric precipitations (rain, snow, etc.) are
expectable.
• The icon «SNOW+ICe» means the frosty
and probably snowy weather.
note: Beginning from 9:00 p.m. (21:00) till 5:00 a.m.
(5:00) instead of «the sun» «the moon» is shown in the
icons «SUN» and «SUN+CLOUDS».
using the backlight
To see the data on the display in the darkness
press the [ ] (LIgHT) button.
Maintenance
Do not place the clock in moist, dust place or
the place with corrosive gas.
Avoid heavy strike or vibration.
Keep the clock far away strong magnetic
apparatuses.
Any +/- 8Kv electrostatic and strong magnetic
field environment, will causing malfunctions,
you must install the battery again.
If disusing the clock for a long time, please
take out the batteries from the clock. Take the
exhausted battery out of the clock immediately.
The exhausted battery should be disposed at
special collection sites or return to your dealer.
ENGLISH ENGLISH
ENGLISH ENGLISH ENGLISH ENGLISH ENGLISH ENGLISH