Yamaha CDX-480 - Manual (Page 10)

To advance rapidly
(Press and hold.)
To reverse rapidly
(Press and hold.)
• The sound can be heard (although slightly garbled) during
manual search in either direction. This is convenient for
locating a precise position within a track, or for reviewing the
contents quickly.
• Manual search can also be performed while disc play is
paused, though no sound will be heard.
•
CDX-580 and CDX-480 only
When using the SKIP/SEARCH button on the front panel:
Be careful not to release the button just after it is pressed,
otherwise the play is skipped to the beginning of the next
track or returned to the beginning of the track.
10
Automatic spacing
When you are recording a disc onto tape, and if the tracks on
the disc are recorded with an insufficient time space between
them, the tape deck will not be able to perform blank search
operations correctly. In this case, a deck search mistake can
be prevented by pressing the auto-SPACE button to insert
spaces of about 4 seconds between the recorded tracks. Note
When the automatic spacing function is in effect, the display of
the total time and of the total remaining time will include each
of the 4 second non-recorded intervals placed between tracks.
To cancel the automatic spacing function
Selecting time displays
You can select any of the four time displays by pressing the TIME display mode-select button.
Note
The remaining time
➁
will not be displayed if the track number
is 25 or higher.
➀
Elapsed time of the track now playing
➁
Remaining time of the track now playing
➃
Total remaining time on the disc
➂
Total disc play time
2 3 4 5 6 7 8 9 10 11 12
2 3 4 5 6 7 8 9 10 11 12
REMAIN
2 3 4 5 6 7 8 9 10 11 12
TOTAL
REMAIN
2 3 4 5 6 7 8 9 10 11 12
TOTAL
TIME
SPACE
SPACE
SPACE
“SPACE” goes off
from the display.
To advance or reverse play rapidly (MANUAL SEARCH)
SEARCH
SEARCH