Yamaha YHT-580 - Manual (Page 9)

9
RECORDING
POWER = ON
1
Preparation for recording
÷ Be sure to set the TIMER switch to the OFF position (KX-580 and KX-480 only), then turn on the POWER switch.
÷ Set your amplifier or receiver to cassette deck function mode.
COUNTER RESET
COUNTER MEMORY
5
1
3 6
]
POWER = ON
1
REC indicator Tape counter
MPX FILTER
indicator PEAK level
meters
6
COUNTER RESET
ŸB/ŸC
indicators
COUNTER MEMORY
2
2
REC
Insert the cassette
with the exposed tape
side facing down and
the side to be
recorded facing you.
To close the
compartment, push in
the compartment door
until it locks shut.
KX-580/KX-480
KX-380
KX-480/KX-380 KX-580
2
(KX-580 only)
2
REC indicator Tape counter
MPX FILTER
indicator PEAK level
meters
ŸB/ŸC/
ŸS(KX-580 only)
indicators
EJECT
REC/PAUSE
DOLBY NR DOLBY NR
PLAY
To stop recording:
Press the STOP button.
To stop recording temporarily:
Press the REC/PAUSE button. To resume recording,
press the PLAY button.
Tape counter and COUNTER RESET button
Before starting recording, press the RESET button to set
the counter reading to “0000”. Use this counter to aid in
locating a point on a tape.
See “Setting the recording level”.
4
8
0 I0
I
2
9
3
6
7
5 0
I I
2 2
3 3
4 4
5 R L 5
BALANCE
* Form of the REC LEVEL control
is slightly different with KX-380.
MUTE/SEARCH 3 BIAS ADJUST
4
MUTE/SEARCH 3 BIAS ADJUST 5
4
Play the
program
source to be
recorded.
5
AUTO TAPE
TUNING
4
See “AUTO TAPE
TUNING button”.
6
REC LEVEL
OFF/ ŸB/ŸC/MPX OFF/ ŸS/MPX OFF/ ŸB/ŸC/MPX