Yamaha SPMK30 - Manual (Page 11)

INSTALLATION PROCEDURE
En 7
English
Attach the safety wire to the small wall mount bracket to prevent the Digital Sound Projector from falling.
Fit the mounting guide hooks of the small wall mount brackets attached to the Digital Sound Projector into the holes on
the left and right sides of the large wall mount bracket and then slide the unit to the right.
Hold the Digital Sound Projector tight with both hands when attaching or removing the Digital Sound
Projector to or from the wall. Holding the Digital Sound Projector loosely could cause the Digital
Sound Projector to fall, resulting in personal injury.
4 Attach the safety wire.
5 Mount the Digital Sound Projector on the wall.
Safety wire
Slip one end
through the loop
at the other end
Repeat the same
procedure for the
other bracket.
Slip the safety wire
between the bracket
and the projector
Slide the unit to the
right.
Fit the hook into the
hole.
Note
01_EN_SPM-K30.fm Page 7 Monday, June 18, 2007 5:59 PM