Zebra Technologies RW SERIES - Manual (Page 54)

54
RW Series User Guide
Figure 26: Cleaning RW Series Printers
RW 420 illustrated
RW Series Cleaning
Area Method Interval
Printhead
(Figure 26)
Use the supplied cleaning pen or 70%
isopropyl alcohol on a cotton swab to
clean the print elements from end to
end (the print elements are located in
the thin gray line on the printhead).
After every five rolls of
media (or more often, if
needed)
Platen Roller
(Figure 26)
Rotate the platen roller and clean it
thoroughly with the cleaning pen or
70% isopropyl alcohol and a cotton
swab.
Tear bar
(Figure 26)
Clean thoroughly with the cleaning
pen or 70% isopropyl alcohol and a
cotton swab.
Exterior Water-dampened cloth As needed
Interior
(Figure 26)
Brush/air blow. Ensure the Bar
Sensor and Gap Sensor windows are
free of dust. After every five rolls of
media (or more often, if
needed)
Tear Bar
Bar Sensor
Gap Sensor
Platen Surface
Printhead
Elements