Specifications – Yamaha DTX RS700 User Manual

Page 7

RS500/RS700 Owner’s Manual

Loosen the bolts of the tom holders and rotate the three tom holders into the positions shown in Figure 3. Then,
retighten the bolts.

Loosen the bolts securing the drum trigger module clamp in place, position the clamp with its flat surface facing
upward, and then retighten the bolts.

CAUTION

• Take special care when handling the tom holders in order to avoid injuring yourself with their sharp ends.

For information about the next steps such as

assembling Yamaha

Electronic Drum Set, refer to

“Assembly Manual” in the Pad Set.

Specifications

 External dimensions: 1346 (W) x 766.3 (D) x 835 (H) mm (Standard Assembly)  Weight: 10 kg

* Specifications and descriptions in this Owner’s Manual are for information purposes only. Yamaha Corp. reserves the right to

change or modify products or specifications at any time without prior notice. Since specifications, equipment or options may not be
the same in every locale, please check with your Yamaha dealer.

[Figure 3: Example of standard assembly]

Tom holder

Bolts

Left leg

Right leg

Drum trigger
module clamp

Right pillar

Left pillar

Tom holder

Bolts

rs500_700_en_1224.fm Page 5 Friday, December 24, 2010 9:15 AM

This manual is related to the following products:

DTX RS500