Pioneer CDJ-500II - Manual (Page 10)

10
En
STANDBY/ON
POWER
D
CDJ-500
COMPACT DISC PLAYER
TRACK SEARCH
4 ¢
SEARCH
1 ¡
CUE
PLAY/PAUSE
6
–
REV
+
FWD
OUT/EXIT TIME
MODE
MASTER TEMPO
MT
EJECT
0
TEMPO
–10
0
+10
'
TRACK T I M E REMAIN
M S F
RELOOP PLAYING ADDRESS 222 333
MASTER TEMPO TEMPO I
È
i
LOOP
IN/
REALTIME CUE
RELOOP
LOOP
AUTO
CUE /
AUTO CUE
LIMITED
PROFESSIONAL
OUT ADJUST
0
BASIC OPERATION
6 indicator
P L A Y / P A U S E
button
POWER switch
EJECT button
Door
3-inch (8 cm) disc
guide
This is the basic operation without the auto cue
function. (The AUTO CUE indicator in the display
window goes off.)
1 Press the EJECT button.
2 Load a disc.
÷ Place a disc to be centered correctly in the disc
compartment with the label side up. With the 3-
inch (8 cm) disc, place a disc in the groove of the
3-inch (8 cm) disc guide correctly.
÷ Do not place more than one disc in the disc
compartment.
3 Push the door in to close.
÷ Playback will automatically start from the first
selection.
÷ When the auto cue function is set to OFF,
playback continues even when the first track is
finished playing.
÷ Playback stops when the last track is finished
playing back.
Basic playback operation
Press PLAY/PAUSE during playback. The 6 indicator
and the CUE indicator blink, and playback is paused.
Press PLAY/PAUSE again to resume playback. The
6 indicator lights up. The sound is intermittently
output even in pause mode. If the sound is not
desired, reduce the output level with the audio mixer.
To pause playback temporarily
CUE indicator
SEARCH
buttons
TRACK SEARCH
buttons
JOG dial
CUE button
TIME MODE
/AUTO CUE
button
Press the EJECT button. Playback stops and the door
is opened.
To stop playback
To search for a particular track
[Using the TRACK SEARCH buttons ( 4, ¢ )]
Each time
¢ or 4 is pressed, playback advances
or reverses to the beginning of the track.
÷ While the button is kept pressed, playback advances
or reverses to successive or earlier tracks. When
the button is kept pressed for more than 2 seconds,
the searching speed becomes faster.
÷ When 4 is pressed at the beginning of the first
track on the disc (track No. 1), the last track on the
disc is searched for.
÷ When ¢ is pressed at the last track on the disc,
the beginning of the first track on the disc (track
No. 1) is searched for.
When the auto cue function is ON, the player stands
by for playback immediately before the track; playback
can be started by pressing the PLAY/PAUSE button.