Yamaha RX-V457 User Manual

Page 74

SOUND FIELD PARAMETER DESCRIPTIONS

For 6ch Stereo:

Function:

These parameters adjust the volume level for each channel in 6-channel stereo mode.

Control range:

0 to 100%

■

CT LEVEL (Center level)

■

SL LEVEL (Surround left level)

■

SR LEVEL (Surround right level)

■

SB LEVEL (Surround back level)

For PRO LOGIC IIx Music and PRO LOGIC II Music:

■

PANORAMA (Panorama)

Function:

Sends stereo signals to the surround speakers as well as the front speakers for a wraparound effect.

Choices:

OFF

, ON

■

DIMENSION (Dimension)

Function:

Gradually adjusts the sound field either towards the front or towards the rear.

Control range:

–3 (towards the rear) to +3 (towards the front), initial setting is STD (standard).

■

CT WIDTH (Center width)

Function:

Adjusts the center image from all three front speakers to varying degrees. A larger value adjusts the
center image towards the front left and right speakers.

Control range:

0 (center channel sound is output only from center speaker) to 7 (center channel sound is output only
from front left and right speakers)

Initial setting:

This parameter can be set only when SUR. STANDARD is selected.

For DTS Neo:6 Music:

■

C. IMAGE (Center image)

Function:

Adjusts the center image from all three front speakers to varying degrees.

Control range:

0 to 1.0

Initial setting:

0.3

This parameter can be set only when

SUR. STANDARD

is selected.

Note