Yamaha CLP-122S - Manual (Page 7)

7
Z
Turn Power On
After making sure that the Clavinova’s AC plug is properly inserted into
a convenient AC wall outlet, press the [POWER] switch located to the left
of the keyboard to turn the power ON.
When the power is turned ON, the [PIANO 1] voice selector LED will
light (the PIANO 1 voice is automatically selected whenever the power is
turned ON).
Initially set the [MASTER VOLUME] control about half way between
the “MIN” and “MAX” settings. Then, when you start playing, re-adjust the
[MASTER VOLUME] control for the most comfortable listening level.
Select the desired voice by pressing one of the voice selectors.
The Clavinova offers keyboard touch response, so the volume and timbre
of notes played can be controlled according to how “hard” you play the
keys. The amount of variation available depends on the selected voice.
You can also add reverb effects as desired by using the [REVERB] but-
ton (see page 10).
V
Play
Selecting & Playing Voices
POWER
X
Set the Volume
MASTER VOLUME
MIN MAX
C
Select a Voice
CLAVINOVA
TONE
PIANO
1
PIANO
2
HARPSI-
CHORD ORGAN E. PIANO
B
Adjust Tone & Add Effects
As Required
REVERB
HALL 1
HALL 2
COSMIC
ROOM