Yamaha CRW4260t-NB - Manual (Page 21)

Chapter 3 - Operation
15
Ejecting the Disc
If the CRW4260t is powered on:
Press the eject button to eject the disc.
Note: You cannot eject the disc if the SCSI command prohibits the eject opera-
tion while the CRW4260t is reading data.
Caution: Be sure to remove the disc after it is completely ejected. (Trying to
remove the disc before it is completely ejected may cause the drive to
malfunction.)
If the CRW4260t is not powered on:
Pressing the eject button will not eject the disc.
Press the eject button