Xerox 8825 - Manual (Page 139)

8825/8830 Controller Setup Manual for Firmware 6.0 123
Configuring the Printer Processing Defaults (continued)
Label Shading & Font Options
Purpose of Label Shading & Font Options
The Label Shading option sets the default shading of the label in percent.
Range: 0 - 100%
Default: 100
The Font option sets the default font to be used in the label string.
Range: All the Xerox supplied fonts
Default: OCRB
PATH TO THE LABEL SHADING & FONT OPTIONS
Display , press [ON-LINE], display , press [ENTER],
display , press [NEXT] until is
displayed, press [ENTER], display , press
[NEXT] until is displayed, press ENTER, press NEXT until SHADING> or is displayed.
SELECTING THE LABEL SHADING & FONT OPTIONS
Press the ENTER key to change the option. If is
selected, use the Keypad to input desired percent. Press ENTER to confirm.
If is selected, use the NEXT key to choose a font and press ENTER
to confirm.
EXITING THE LABEL SHADING & FONT OPTIONS
Press EXIT to set up additional functions. Press the ON-LINE key to go back
to ON-LINE mode.