Zonet Technology ZSR0104C Series - Manual (Page 24)

Page 17
Step 2. Click the “Advanced Setup “ (see Figure 4 – 2) and will be displayed, Figure 5 - 1.
Step 3. The Router Status screen will show up and tell the current WAN and LAN IP settings of
your ZSR0104C SERIES, including IP address, Subnet Mask, Gateway, Primary DNS,
and Secondary DNS. On the left, you will see 5 main categories, including System, Wan,
Lan, Nat and Firewall.
Figure 5 - 1
5.2 System
Click the “System/System” button, will see the Figure 5-2
Figure 5 - 2
The System page provides the NAT information.