beautypg.com

Music synchro recording, Setting the recording mode, Recording – Yamaha MDX-E300 User Manual

Page 17: Englishenglish

background image

15

EnglishEnglish

Music synchro recording

The synchronized recording function lets you set this unit
to start recording automatically when a sound signal is
input.

1

Load the sound source into the source component.

If necessary, program, or select the track you want
to start recording from before proceeding to the
next step. (Refer to the operation manual supplied
with the source component for instructions
regarding its use.)

2

Press INPUT repeatedly to select the input connected
to the sound source you want to record.

3

Press SYNC to set this unit to record pause mode.

The REC

* indicators light up.

“Synchro REC” and the amount of time available
for recording flash alternately in the display.
During synchronized recording, analog input
sources are recorded at the current ANALOG
REC LEVEL
setting, digital sources are recorded
at the 0 dB level.

The MD starts recording automatically when a
sound signal is input. When the sound signal
stops, the unit switches back to record pause mode
and “Synchro REC” blinks in the display. The
next time a sound signal is detected, recording
starts again. In this manner, the presence of a
sound signal automatically switches the unit
between record and record pause modes.

4

Start playing the sound source.

To cancel the synchronized recording
mode

Press

&.

Note

• When the signals at the beginning of a track are lower than the

level required to start synchronized recording, they are not
recorded. Should this occur, perform manual recording.

SYNC

INPUT

REC MODE

&

Setting the recording

mode

This unit incorporates various recording modes. Choose
the one that suits your needs.

Press REC MODE repeatedly until the indicator for the
desired recording mode lights up.

Example: When using an 80 minute MD

MONO (monaural)

This mode provides 160 minutes monaural recording.

LP2

This mode provides 160 minutes stereo recording.

LP4

This mode provides 320 minutes stereo recording.

When all of the above indicators are turned off, this unit
enters normal stereo recording mode.

Notes

• MDLPs (= discs recorded in LP mode) cannot be played back

nor edited on non MDLP players. If you play MDLPs (=discs
recorded in LP mode) on a non-MDLP player, “LP:” will
appear at the top of the title and no sound will be reproduced.

• Normal stereo recording provides the best sound quality.
• The recording mode cannot be changed during recording.

A-B

S/F

DISPLAY

POWER

SCROLL

REC/
PAUSE

SYNC

M-MARK

REC MODE INPUT

RANDOM PROGRAM

REPEAT

A-B

S/F

DISPLAY

POWER

SCROLL

REC/
PAUSE

SYNC

M-MARK

REC MODE INPUT

RANDOM PROGRAM

REPEAT

RECORDING

0105MDXE300(M).13-16.E

02.5.17, 10:54 AM

15