Yamaha CDV-W901 - Manual (Page 9)

ENGLISH
9
CONNECTIONS
Connection of an additional stereo amplifier
Stereo amplifier
Plug into a
household power
outlet after
completing all
connections.
This connection diagram shows how to connect the audio output to a stereo amplifier while the video output is connected to a TV as shown on
page 8.To reproduce the audio of a Compact Disc or an LaserDisc with improved quality, it is recommended to connect the player to a stereo
amplifier.
Connect the AUDIO OUT jacks to the input jacks labeled LD, CD or AUX, etc. (Never connect to the PHONO input
jacks.)
Also read the operating instructions of your stereo amplifier.
INSERTING BATTERIES INTO THE REMOTE
CONTROL UNIT
1 Open the battery compartment cover on the back of the re-
mote control unit. Press the tab and open the cover in the
direction of the arrow.
2 Take out the two accessory size "AAA" (IEC R03) dry cell batter-
ies, and insert them into the battery compartment in accor-
dance with the display (
ª, ·) inside the compartment.
3 Close the cover of the battery compartment.
1
Incorrect use of batteries may cause leakage or rupture.
Always be sure to follow these guidelines:
A. Always insert batteries into the battery compartment cor-
rectly matching the positive ª an negative · polarities, as
shown by the display inside the compartment.
B. Never mix new and used batteries.
C. Batteries of the same size may have different voltages, de-
pending on brand. Do not mix different brands of batteries.
2
3
Commercially-available
optical cable
Accessory audio cord
•