Setting the remote control code – Yamaha RX-N600D User Manual
Page 100
98
En
REMOTE CONTROL FEATURES
You can control your TV and other components by setting
the appropriate remote control code for each input source.
For a complete list of available remote control codes, refer
to “LIST OF REMOTE CONTROL CODES” at the end of
this manual.
The following table shows the default component in the
“Library (component category)” column and the remote
control code for each input source.
Remote Control Code Default Settings
You may not be able to operate your YAMAHA component even
if a YAMAHA remote control code is initially set as listed above.
In this case, try setting other YAMAHA remote control codes.
y
The blank button is the one on the right of MD/CD-R.
1
Press one of the input selector buttons,
or the blank button on the right of MD/CD-R
to select the component you want to set up.
2
Press CODE SET using a ballpoint pen or a
similar object.
The TRANSMIT indicator on the remote control
flashes twice.
3
Press the numeric buttons (0 to 9) to enter
the five-digit remote control code for the
component to be used.
The TRANSMIT indicator on the remote control
flashes twice, and the remote control code for the
selected component is set.
y
To clear the remote control code previously set for the selected
component, enter the code number “9980”.
• If the manufacturer of your component has more than one code,
try each of them until you find the correct one.
• If you do not press any buttons within 30 seconds in step 3, the
setup process is canceled. If this happens, repeat the setup
procedure.
Setting the remote control code
Input
source
Library
(component
category)
Manufacturer
Default
code
CD
CD
YAMAHA
61907
MD/CD-R
MD
YAMAHA
70888
DVD
DVD
YAMAHA
40539
DTV/
CBL
–
–
–
TUNER
TUNER
YAMAHA
81916
V-AUX/
DOCK
OTHER AUDIO
ACCESSORIES
(iPod)
YAMAHA
81981
DVR
DVR
YAMAHA
51544
NET/
USB
OTHER AUDIO
ACCESSORIES
(NET/USB)
YAMAHA
81982
–
–
–
Blank
button
TAPE
YAMAHA
70524
Note
Notes
CD
MULTI CH IN
SLEEP
CD-R
DVD
DTV
MD
DOCK
USB
CBL
NET
TUNER
V-AUX
DVR
TRANSMIT
CODE SET
Flashes
STEREO
1
EFFECT
STANDARD
5
SPEAKERS
9
MUSIC
2
SELECT
6
ENHANCER
0
ENTERTAIN
3
EXTD SUR.
7
NIGHT
10
MOVIE
4
DIRECT ST.
8
STRAIGHT
ENT.
TRANSMIT
Flashes