Vidikron Vision 30 - Manual (Page 30)

30 Vidikron Vision Model 30 Owner’s Operating Manual
Basic Operation
Selecting an Aspect
Ratio
EXIT
L-BOX
I-WIDE CINEMA C-FILL
MEM1
ISF
NT
ISF
DAY
DEF
1 2 3
4 5 6
7 8 9
0
PIP PIP+
PIP-
ACTIVE
PBP VAC
LIGHT
MENU
ON OFF
COMP 1
COMP 2
S-VID VIDEO
RGB HD HDMI
ANA 4X3
Select an aspect ratio that suits the format of
the video signal. The following aspect ratios are
available.
• ANA (Anamorphic): A 4:3 image is stretched
horizontally to fit a 16:9 screen. This setting is
for 16:9 DVDs and HDTV programs.
• 4 X 3 (Standard 4:3): The input signal is scaled
to fit a 4:3 display mode in the center of the
screen.
• L-BOX (Letterbox): An image in letterbox
format is enlarged to fit a 16:9 full screen
display; the upper and lower portions are
compressed.
• I-WIDE (IntelliWide): This setting transforms
a 4x3 image to a 16x9 image.
• CINEMA: The image in the Letterbox mode is
enlarged to a 16x9 image and the upper and
lower portions are compressed.
• C-FILL (Cinema Fill): A 2.35 image is stretched
vertically in both directions to fill a 16:9
image.
Selecting Video
Memory
EXIT
L-BOX
I-WIDE CINEMA C-FILL
MEM1
ISF
NT
ISF
DAY
DEF
1 2 3
4 5 6
7 8 9
0
PIP PIP+
PIP-
ACTIVE
PBP VAC
LIGHT
MENU
ON OFF
COMP 1
COMP 2
S-VID VIDEO
RGB HD HDMI
ANA 4X3
• Press MEM1 to recall custom memory
settings.
• Press ISF NT (Night) to recall ISF Night
settings.
• Press ISF DAY to recall ISF Day settings.
NOTE: ISF settings must be calibrated
and stored by a certified ISF calibrator.
For more information, please go to www.
imagingscience.com.
• Press DEF (Default) to restore factory
settings for the current source. An on-
screen confirmation message appears.
Press DEF again to confirm.