VTech Color Blast Notebook - Manual (Page 6)

BATTERY INSTALLATION
NOTE: For best performance, replace with new, alkaline batteries.
Color Blast Notebook™ operates on 4 “AA” sized batteries or a VTech ® 9V adaptor (sold
separately).
1. Make sure the unit is turned OFF.
2. Locate the battery cover on the bottom of the unit and open it.
3. Insert 4 “AA” sized batteries as illustrated.
4. Close the battery cover.
NOTE: For best performance, replace with new, alkaline batteries.
RECHARGEABLE BATTERIES ARE NOT RECOMMENDED.
Important: When replacing the 4 “AA” sized batteries, make sure the backup battery is
in the unit. Otherwise you will lose any information stored on the unit.
BACKUP BATTERY INSTALLATION
Your Color Blast Notebook™ comes with a backup battery already installed. To avoid
damage to the unit from leaky batteries, replace the backup battery at least once a year.
TO REPLACE THE BACKUP BATTERY
1. Make sure the unit is OFF.
2. Using a small screwdriver, loosen the battery
cover.
3. Insert 1 CR2032 sized battery as illustrated.
4. Close the battery cover and tighten the screws to secure it.
Important: While replacing the backup battery, the 4 “AA” sized batteries must be kept in
the unit. Otherwise, you will lose any saved information stored on the unit.
BATTERY NOTICE
- The use of new alkaline batteries is recommended for maximum performance;
- Do not try to recharge non-rechargeable batteries;
- Rechargeable batteries are to be removed from the toy before being charged;
- Rechargeable batteries are only to be charged under adult supervision;
- Do not mix different types of batteries: alkaline, standard (carbon-zinc) or rechargeable
(nickel-cadmium);
SET-UP
5