Universal Electronics Polaris - Manual (Page 3)

www.urcsupport.com
3
QUICK START GUIDE
Welcome to the Polaris Remote Control Quick
Start Guide. To start using your remote control
right away, just follow the steps below.
Note: This Quick Start Guide assumes your
Polaris Remote Control has battery power. If
your remote control does not have power,
please refer to the section, See “Installing
Batteries” on page 11.
Your Polaris Remote Control was designed for
comfort, convenience, and simplicity. Use the
TV and CBL keys to turn the power on and off
for your television and cable box. The Volume
and Mute keys are locked to control your TV’s
volume, and all other functions control your
cable box.
PROGRAM CONTROL OF YOUR
TELEVISION AND CABLE BOX
You can control your television and your cable
box with your Polaris Remote Control. Follow
these steps to program device control.
Note:
Please refer to “Device Table” on
page 11 to find out which devices you
can program onto each device key.
1. Turn on the device you wish to
control.
3. Use the “Manufacturer’s Codes
(Códigos del Fabricante)” on page 39
to locate the type of device and its
brand name. Enter the first four-digit
code for that device and brand. If the
code is correct, the device key blinks
twice. If the key emits a single, long
2. Press the appropriate device key
(either TV or CBL). The key blinks
once. Then press and hold the SETUP
key until the selected device key
blinks twice.