Uniden BTSC1500 - Manual (Page 9)

Common Tasks
Hang up a call During a call, press Multi-function.
Reject a call Press and hold Multi-function until you hear a long beep (about 2 seconds).
Change the volume During a call, press Volume Up for more volume or Volume Down for less volume.
Mute the
microphone
To mute the microphone so the caller can’t hear you, press and hold Volume Down for about
2 seconds. While the microphone is muted, the travel kit plays a melody every 10 seconds to
remind you. To turn the microphone back on, press either Volume Up or Volume Down.
Open the call log
With the phone in standby, press Volume Up to see the outgoing call log or Volume Down to
see the incoming call log. To dial the number on the display, press Multi-function.
Redial the last
dialed number
With the phone in standby, press Multi-function. When the phone displays the number, press
Multi-function again.
Activate voice
dialing
With the phone in standby, press & hold Multi-function for about 2 seconds. When you hear
a beep, you can use any command you have already programmed into your phone. (The phone
must support voice dialing.)
Send a call back to
your phone.
Press and hold Multi-function for 2 seconds. The travel kit sends the call to the phone &
disconnects from the phone.