Binatone FM-320 - Manual (Page 6)

6
BEFORE USE
Remove all packing materials from the de-
vice and clean it as specified in this Operation
Manual.
OPERATING INSTRUCTIONS
Attention: appliance operates without
water!
Appliance usage
1. Place the appliance on a level horizontal surface in front of a
comfortable seat (chair).
2. Pour in ceramic beads.
3. Make sure the mode switch (3) is in position «0»
4. Plug the appliance into a wall outlet.
5. To avoid overheating your feet, put on socks before
the massage.
6. Sit down first and then place your feet into the foot bath.
Always remain seated when placing your feet into
the bath or removing them.
7. Move the mode switch (3) to the desired position. For heating
- «1». Beads will be heated in about 13 minutes. Then select
mode «2» or «3» to maintain temperature.
8. Place your feet in the bath and massage them with the warm
ceramic beads.
9. After finishing the massaging procedures set the switch (3) to
the «0» position and follow the instructions in the «Care and
cleaning» section.
Description of operational modes
1) heating
Massage with warm ceramic beads relieves muscle tension
and improves blood circulation in the feet, giving a pleasant
and lasting sense of warmth. Warm ceramic beads effectively
massage the feet.
2) keep hot
3) keep warm
Temperature maintenance
This function provides ceramic beads temperature maintenance
during the complete procedure (15-20 minutes).