RocketFish RF-GPS3009 - Manual (Page 9)

Using the racing wheel-advanced features
Programming the racing wheel
To program the racing wheel:
1 Press and hold SELECT and START for three seconds. The LED turns on.
2 Press the button or move the controller for the item you want to
program. The LED flashes. You can program the foot pedals, left paddle,
right paddles, L3, R3, and the gear stick.
3 Press the source button ( , , , , L1, L2, R1, or R2). The LED turns off.
Canceling a single programmed function
To cancel a single programmed function:
1 Press and hold SELECT and START for three seconds. The LED turns on.
2 Press the button for the function you want to cancel. The LED flashes.
3 Press the function button again. The LED turns off and the function is
canceled.
Canceling all programmed functions
To cancel all programmed functions:
1 Press and hold SELECT and START for three seconds. The LED turns on.
2 Press and hold START until the LED turns off. All programmed functions
are canceled.
Assigning foot pedals to the RY axis
To assign foot pedals to the RY axis:
1 Press and hold SELECT and START for three seconds. The LED turns on.
2 Press the foot pedal you want to assign to the RY axis. The LED turns off
and the pedal is assigned to the RY axis.