Radio Shack Pro-97 1,000 - Manual (Page 49)

49
Beyond the Basics
2. Press the desired bank and the channel number where
you want to store the frequency. The display indicates
the bank and channel number. After about 1 second, the
frequency to be copied fl ashes.
3. Press ENT. All the conditions such as receive mode and
delay condition are copied onto the channel. Channel
Stored! briefl y appears. The scanner automatically returns
to search mode.
If you try to copy a frequency which is already stored, the
scanner sounds the notice tone 3 times after you press ENT.
Dupl.Freq. ChXXX appears. If you want to copy the duplicate
frequency anyway, press ENT, or if not, press CL to cancel.
copying a frequency into an empty channel within a
bank
You can copy a frequency into a vacant channel in a
specifi ed bank when the scanner stops on the frequency
during search or tune mode.
1. Press FUNC then ENT when you fi nd a frequency you want
to copy. Bank 9 Store? appears.
2. If you want to copy the frequency into bank 9, press ENT.
It is stored in the fi rst available vacant channel in the
bank. Or, press your desired bank number to store, then
press ENT. Channel Stored! appears for 2 seconds. All the
conditions such as receiving mode and delay condition
are copied on the channel. After about 2 seconds, the
scanner automatically returns to search mode.
3. If you try to copy a frequency which is already stored, the
scanner sounds the notice tone 3 times after you press
ENT. Dupl.Freq. ChXXX appears on the third line. If you
want to copy the duplicate frequency anyway, press ENT,
or if not, press CL to cancel.