Radio Shack Auvio 40-290 - Manual (Page 5)

Painting the speaker (optional)
Before you connect the speaker wire or mount the speaker,
you can paint the frame and grille.
1. To remove the grille, insert a
paper clip into one of the grille
openings, then pull up.
. Before you paint the grill, carefully
remove the dust cloth.
. Before you paint the frame, insert the supplied
cardboard paint mask to prevent paint from entering the
speaker.
4. After the paint is dry, remove the paint mask, replace
the dust cloth, and reinstall the grille.
n
Note: Using spray paint will keep paint from blocking
grille holes. Do not paint speaker components.
Specifications
Resonance Frequency ..............................................65 Hz ±20%
Frequency Response ..............................................70–20,000 Hz
Power Handling........................................ 50W RMS, 100W Max.
Impedance (nominal) ........................................................ 8 ohms
Sensitivity ................................................ 87 dB ±3 dB @ 1W-1M
Tweeter Size .............................................................1 in (25 mm)
Woofer Size ......................................................... 6.5 in (165 mm)
Dimensions (HWD) ..........12 Ч 8.6 Ч 2.8 in (305 Ч 218 Ч 70 mm)
Specifications are subject to change and improvement without notice. Actual
product may vary from the images found in this document.
Limited Warranty
Ignition L.P. warrants this product against defects in materials and workmanship
under normal use by the original purchaser for one (1) year after the date of
purchase. IGNITION L.P. MAKES NO OTHER EXPRESS WARRANTIES.
Frame
Grille