Netopia R5300 User Manual
Page 104
9-4 User’s Reference Guide
■
Alternatively, from the WAN Configuration menu in the Main Menu screen, select Display/Change
Connection Profile. When that screen appears, select IP Profile Parameters. You can now access the
Address Translation option from the IP Profile Parameters menu.
4.
Select IP Addressing and, from the pop-up menu, choose the IP routing method that your ISP or network
administrator specifies (either Numbered or Unnumbered). For more information see
“Understanding IP Addressing,”
and
Appendix C, “Understanding Netopia NAT Behavior.”
IP Profile Parameters
Address Translation Enabled: Yes
IP Addressing... Unnumbered
Local WAN IP Address: 0.0.0.0
Remote IP Address: 0.0.0.0
Remote IP Mask: 0.0.0.0
Filter Set...
Remove Filter Set
Receive RIP: Both
Transmit RIP: v2 (multicast)
Configure IP requirements for a remote network connection here.