Nortel Networks 330 - Manual (Page 47)

Using the Basic Features of Your SoundPoint IP 330/320 Phone
3 - 5
• Multiple Line Keys per line
If your phone is configured with multiple call appearances, refer to Using
Multiple Call Appearances on page 4-3 for instructions on how to answer a
call.
Answering When Not in Another Call
In all cases, the active call will appear on the graphic display showing call
duration and destination.
To answer a call using the handset:
¾ Pick up the handset.
To answer a call using Hands-Free Speakerphone mode:
¾ Do one of the following steps:
— Press .
— With the handset on-hook, press
opposite the incoming
call (where the line status indicator is flashing green).
— Press the Answer soft key.
Note Incoming calls may be ignored by pressing the Reject soft key (for private lines) or
the Ignore soft key (for private and shared lines).
When your SoundPoint IP 330/320 phone is configured for silent ring, press the
ringing Line key or the Answer soft key to answer the call. If your handset is off
hook, the call is routed to the handset. If your handset is on hook, the call is routed
to the speaker.
Note Dual-tone multi-frequency (DTMF) signaling is not available while a call is incoming.
You may resume DTMF signaling by pressing the Reject soft key (for private lines)
or the Ignore soft key (for private and shared lines). For more information, contact
your system administrator.
Note If “Handsfree mode disabled” appears on the graphic display after you press the
speakerphone key
, your system administrator has disabled the speakerphone on
your phone.