Nortel Networks Nortel IP Phone 1230 - Manual (Page 112)

Operating your IP Phone 1230
112
Parking a call using the SPRE code or FFC
To park a call using the SPRE code or FFC, perform the following
procedure.
Retrieving a parked call
Use the following step to retrieve a parked call.
Note: When Call Park is configured network-wide, you can use this
feature across networks. You can configure a System Park extension
to automatically park most calls.
1. Press the Trans soft key.
or
Press the Conference soft key.
2. Dial the Call Park FFC.
3. To use an alternative DN from the
System Park DN or your own DN, dial
the DN where you want to park the call.
Otherwise, proceed to step 4.
4. Press the Transfer soft key.
or
Press the Conference soft key.
1. Lift the handset.
or
Conf Trans
or
Conf Trans