Netopia 4553 - Manual (Page 45)

WAN and System Configuration 7-45
IP parameters (default profile) screen
If you are using RFC1483 datalink encapsulation, the IP Parameters (Default Profile) screen allows you to
configure various IP parameters for G.shdsl connections established without an explicitly configured connection
profile:
For an G.shdsl link, Network Address Translation (NAT) is disabled by default in the Default Profile. You can
enable it by toggling to Yes. For details on setting up IP Parameters see
“IP Setup” on page 8-64 .
Scheduled connections
Scheduled connections are useful for PPPoE, PPTP, and ATMP connection profiles.
To go to the Scheduled Connections screen, select Scheduled Connections in the WAN Configuration screen.
IP Parameters (Default Profile)
Address Translation Enabled: No
Filter Set (Firewall)...
Remove Filter Set
Receive RIP: Both
Transmit RIP: Off
Return/Enter accepts * Tab toggles * ESC cancels.
Main
Menu
WAN
Configuration
Scheduled
Connections