Nortel Networks T7406E - Manual (Page 12)

12 Chapter 2 Introduction
NN40110-110 NN40110-110
The following icons appear on the LCD to indicate the battery level. The battery level icons show
approximate charge status values.
Standby mode
The handset goes into standby mode after one minute of no use. The Sleeping... message
appears on the LCD.
Alerts
There are three types of alerts:
• audio: the handset has eight ring tones from which you can choose; press the Func key to
mute alerts.
• visual: the handset LCD and dial pad are back-lit when the phone rings, and the call-hold
indicator flashes when a call is on hold.
• vibration: the handset is equipped with a dc motor that vibrates the phone when it rings
(use the Programming menus to turn the vibration feature on or off).
Ring duration and volume
You can select the ring duration to be a continuous tone or an intermittent pulse. Use the volume
keys on the left-hand side of the handset to adjust the ring tone volume level. The ring tone volume
level is also the default volume level for audio alerts.
Handsfree and speakerphone
The T7406E cordless handset offers both handsfree and speakerphone functionality.
Indicates battery pack is fully charged.
Indicates battery pack is 2/3 charged.
Indicates battery pack is 1/3 charged.
Indicates battery pack is completely
discharged.