Pioneer RCS-LX60D - Manual (Page 137)

The Initial Setup menu 15
137
En
Chapter 15
The Initial Setup menu
Using the Initial Setup menu
The Initial Setup menu is where you can set various recorder options for sound, picture, language and so on.
Some settings can only be changed when the recorder is stopped. During playback and recording these settings are
grayed out in the Initial Setup menu.
Except for the Setup Navigator, menu screens are exited automatically after 20 minutes of inactivity.
• Press HOME MENU and select ‘Initial Setup’.
In the table below, the default option is marked with a •.
Setting Options Explanation
Basic
Clock Setting Auto Set the channel that broadcasts a clock signal and the clock will be set
automatically.
Manual • If there is no channel that broadcasts a clock signal in your area, you can set
the time and date manually.
• If any digital TV channels are set then the clock will automatically be set.
• The clock must be set in order to use timer recording.
Input Line System 525 System Use for NTSC or PAL-60 recording from an external input.
625 System • Use for standard PAL or SECAM recording.
• This setting is applicable only when recording from an external input.
• See also About the input line system on page 146 for more information on this setting.
Power Save Mode 1 Only signals arriving at the antenna input are passed through to the antenna
output when the recorder is in standby.
Mode 2 No input signals are passed through to the outputs when the recorder is in
standby.
Off • When the recorder is in standby, all signals arriving at the SCART and
antenna inputs are passed along to the outputs.
HELP Setting On • Switches on the automatic Help screens for GUI displays.
Off Switches off the automatic Help screens for GUI displays. (Press HELP on
the remote to manually display the Help screen.)
EPG Type Select GUIDE Plus+ Use the Gemstar GUIDE Plus+ EPG.
Digital EPG Use the EPG based on information provided by D.TV broadcasts.
Setup Navigator Start Select to start the Setup Navigator. See also Switching on and setting up on
page 56 .
Digital Tuner
Replace Channels Next Screen Scans for digital channels and replaces all the channel presets with the
results. Before the scan starts you will need to select your country.
After the scan is complete the recorder tells you whether any new channels
were found, and if so, how many.
(You can cancel the scan before it has finished by pressing
HOME MENU or
RETURN/EXIT . In this case, no channels are set.)
If you execute a Replace Channels command, any timer recordings set for D.TV channels will be erased.
DVRLX60D_WV_EN.book 137 ページ ２００７年４月２４日 火曜日 午後７時５８分