Panasonic DMP-BDT300 - Manual (Page 11)

11
VQT2T11
C
onne
c
ti
ons
a
nd s
e
tt
ings
Analog Audio
∫ Via a COAXIAL or OPTICAL terminal ∫ Via a 5.1/7.1ch AUDIO OUT terminal
≥ When connecting a TV (> 8) with HDMI AV OUT terminal,
set “HDMI Audio Output” to “Off” (> 32).
≥ Set “Digital Audio Output” depending on the used terminal
and connected amplifier/receiver (> 31).
Cable connections
a Front speaker (L/R)
b Surround speaker (L/R)
c Subwoofer
d Centre speaker
e Surround back speaker (L/R)
(Only for 7.1ch AUDIO OUT)
≥ Set “Analog Audio Output” to “7.1ch” or “2ch (Downmix) +
5.1ch”, depending on the used terminal (> 32).
≥ You can set the “Analog Audio Output” from the “Easy
Setting” (> 14).
≥ When connecting equipment with HDMI AV OUT terminal,
set “HDMI Audio Output” to “Off” (> 32).
COAXIAL IN OPTICAL IN
Amplifier/receiver
Coaxial cable Optical cable OR
    
Connect Audio cables to
terminals corresponding
to the speakers you have
connected.
Multi channel speakers
Amplifier/receiver
DMP-BDT300EG-VQT2T11 _eng.book 11 ページ ２０１０年３月３日 水曜日 午後６時３３分