Python 436 Series - Manual (Page 24)

21 © 2 0 0 2 d i r e c t e d e l e c t r o n i c s , i n c .
p prro og grra am mm miin ng g o op pttiio on nss
Programming options control what your system does during
normal operation, and require few or no additional parts.
However, some may require additional installation labor.
The following is a list of the program settings, with the factory
settings in B Boolld d::
➤ A Accttiivvee aarrm miin ngg (only with the transmitter) or passive arming
(automatic arming 30-seconds after the last door has been
closed).
➤ Arming/disarming confirmation siren chirps oon n or off.
➤ The ignition controlled door lock feature oon n or off: With
this feature on, the doors will lock three seconds after the
ignition is turned on, and unlock when the ignition is
turned off. If your installer is programming the security
system with the Directed Bitwriter, ignition lock and unlock
are independent features and can be programmed separately.
➤ Passive door locking (with passive arming) or aaccttiivvee d doooorr
lloocckkiin ngg (only when arming with the transmitter). Passive
locking allows the vehicle's doors to lock when the security
system passively arms (after the 30 second countdown). This
feature only works if passive arming has been programmed.
note: When programmed for passive arming and active
lock, if the system is disarmed without a door being
opened, the system will relock the doors when it passive-
ly rearms.