PSC Falcon 4400 Series - Manual (Page 19)

Ram Ball Mounting Assembly
Installation Guide
13
Attaching the Ram Ball to the Vehicle Dock
1. Align the second Ram Ball with the four screw holes on the rear of the
Vehicle Dock as shown in Figure 8.
Figure 8. Installing the Ram Ball on the Vehicle Dock
Secure the Ram Ball to the mounting area using the four supplied 10-24 x
5/8” Phillips head screws and four supplied 10-24 hex nuts.
Final Assembly
1. Insert the Ram Ball, mounted to the rear of the Vehicle Dock assembly,
into the Ram Ball assembly you earlier affixed to the mounting surface
(see Figure 9). Tighten the adjustment knob to secure the Ram Ball in
place.